Delta Single Handle Kitchen Faucet Cartridge

Installation Directions Delta Kitchen Faucet Ideas

Fixing Delta Kitchen Faucet Leak Ideas

Instructions Delta Kitchen Faucet Repair Ideas

June 25, 2019 Kitchen Sink and Faucet

Repairing Single Handle Kitchen Faucet Valve

Single handle kitchen faucet valve is usually one of two types: cartridge or ball valve. The operation of a faucet valve is essentially the same as that of a faucet, which is the method of repairing it.

Best Single Handle Kitchen Faucet

Best Single Handle Kitchen Faucet

Instructions

12 Inspiration Gallery from Repairing Single Handle Kitchen Faucet Valve

Image of: Wall Mount Single Handle Kitchen Faucet
Image of: Stainless Single Handle Kitchen Faucet
Image of: Single Handle Kitchen Faucet Sink
Image of: Single Handle Kitchen Faucet on the Wall
Image of: Single Handle Kitchen Faucet Handle Pull Out
Image of: Single Handle Kitchen Faucet Double Sink
Image of: Single Handle Kitchen Faucet Decorating
Image of: Nickel Single Handle Kitchen Faucet
Image of: Nice Single Handle Kitchen Faucet
Image of: Modern Single Handle Kitchen Faucet
Image of: Great Single Handle Kitchen Faucet
Image of: Best Single Handle Kitchen Faucet
 

Turn off the water to the shower before you start. You may need to search for water shutdown in the basement or under the house. Turn off the main water pipe to the house if you cannot find it. Single handle kitchen faucet Use the channel lock to unscrew the nut that holds the valve assembly in place. Some cartridges are held in place by a pin and, if so, pull out the pin with channel lock. Set the nut or pin to the side.

If any plastic valve or valve seat is chipped, replace the entire valve mechanism. Replace the new valve mechanism, making sure that the springs is properly seated in ball valves and that the cartridges are replaced in the same direction as when they were removed. Replace the pin or pull the nut assembly. Attach the handle and tighten the screw that holds it. Single handle kitchen faucet to turn off the water and test. Screw the brass collar on the tap with duct cover pliers. Remove the plastic body from the collar with a screwdriver. Extend valve seals as well. Release new valve seals with your fingers. Replace all faucet parts in reverse order of how you removed them; Use duct cover pliers and screwdrivers to secure parts when needed.

Comments are closed.