Corner Sink Vanity – Corner sinks offer a convenient, out-of-the-way alternative to a sink mounted in the center, since, with a sink on each side of the bar, working in these sinks allows greater access to each side of the sink. Kitchen. Although a corner sink seems more complicated than a regular sink, the same materials and installation methods are required.
The first thing that you will have to install a corner sink is a template of the sink or a ruler. Most manufacturers offer a subsidence template, which is an exact scale diagram of the edge of the sink. The template fixed on the top of the counter to facilitate the placement and planning. If you do not have any templates, you can simply place the corner sink in an upside down position on the countertop and trace around it, then draw another 1/2 inch line inward on the line drawn as the cut line.
To cut the hole in the middle of the counter, you need a pilot hole, or an incoming hole, which is just a simple hole through the counter. A regular 1/8 inch drill bit is the ideal choice for laminate or wooden countertops. To mount the heat sink you need a variety of clips that hold onto the edge of the sink. The clips usually come with the sink; however, if your sink does not have these clips, you can order it as a replacement from a plumbing supply store or from the manufacturer.